Our Products

Featured

GEMTECH Differential Pressure Gauge Supplier By Sirohi Rajasthan | https://dpengineersindia.in 

GEMTECH Differential Pressure Gauge Supplier By Sirohi Rajasthan | https://dpengineersindia.in 
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

Leading Supplier of GEMTECH Differential Pressure Gauge By Behror Alwar Rajasthan- Sirohi (Rajasthan )

Leading Supplier of GEMTECH Differential Pressure Gauge By Behror Alwar Rajasthan- Sirohi (Rajasthan )
Series G2000, GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct, Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

ModelDescription
G2300-0Differential Pressure Gage, Range 0.25-0-0.25″ w.c., Minor Divisions .01, Calibrated For Vertical Scale Position.
G2301Differential Pressure Gage, Range 0.5-0-0.5″ w.c., Minor Divisions .02.
G2302Differential Pressure Gage, Range 1-0-1″ w.c., Minor Divisions .05.
G2304Differential Pressure Gage, Range 2-0-2″ w.c., Minor Divisions .10.
G2310Differential Pressure Gage, Range 5-0-5″ w.c., Minor Divisions .20.
G2320Differential Pressure Gage, Range 10-0-10″ w.c., Minor Divisions .50.
G2330Differential Pressure Gage, Range 15-0-15″ w.c., Minor Divisions 1.0.
Featured

Wholesaler GEMTECH Differential Pressure Gauges G2000 In Jalandhar- Wariana Industrial Area Punjab

Wholesaler GEMTECH Differential Pressure Gauges G2000 In Jalandhar- Wariana Industrial Area Punjab

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

Wholesaler GEMTECH Differential Pressure Gauge FROM Sector 9 Highway Bahadurgarh | GANAPATI DHAM INDUSTRIAL AREA | 8376899729 | D.P.ENGINEERS

Wholesaler GEMTECH Differential Pressure Gauge FROM Sector 9 Highway Bahadurgarh | GANAPATI DHAM INDUSTRIAL AREA | 8376899729 | D.P.ENGINEERS
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge Wholesale India GANAPATI DHAM INDUSTRIAL AREA – 9268631221 – D.P.ENGINEERS

GEMTECH Differential Pressure Gauge Wholesale India GANAPATI DHAM INDUSTRIAL AREA – 9268631221 – D.P.ENGINEERS
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge Wholesale India From Kumarhatti Shimla Bypass – Bagbania Industrial Area Himachal Pradesh INDIA

GEMTECH Differential Pressure Gauge Wholesale India From Kumarhatti Shimla Bypass – Bagbania Industrial Area Himachal Pradesh INDIA

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge In Baddi Industrial Area Himachal Pradesh – Bagbania Industrial Area Himachal Pradesh

GEMTECH Differential Pressure Gauge In Baddi Industrial Area Himachal Pradesh – Bagbania Industrial Area Himachal Pradesh
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment.There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge Wholesale India By Jhiwana Rajasthan – Industrial Area Thanagazi Alwar India

GEMTECH Differential Pressure Gauge Wholesale India By Jhiwana Rajasthan – Industrial Area Thanagazi Alwar India
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge From Thanagazi Alwar Rajasthan-Industrial Area Thanagazi Alwar

GEMTECH Differential Pressure Gauge From Thanagazi Alwar Rajasthan-Industrial Area Thanagazi Alwar
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

Industry Leaders Supplier GEMTECH Differential Pressure Gauge By Vasai (Maharashtra)

Industry Leaders Supplier GEMTECH Differential Pressure Gauge By Vasai (Maharashtra)
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)
  • (Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge Form Keithelmanbi Champhai- Kalapahar Industrial Area Assam(India)

GEMTECH Differential Pressure Gauge Form Keithelmanbi Champhai- Kalapahar Industrial Area Assam(India)
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

Wholesaler GEMTECH Differential Pressure Gauge FROM Dadra – Silvassa Dadra And Nagar Haveli & Daman Diu

Wholesaler GEMTECH Differential Pressure Gauge FROM Dadra – Silvassa Dadra And Nagar Haveli & Daman Diu

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge From Amgaon Chandrapur Road – Amingaon Industrial Area Guwahati Assam (India)

GEMTECH Differential Pressure Gauge From Amgaon Chandrapur Road – Amingaon Industrial Area Guwahati Assam (India)
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

Industry Leaders Supplier GEMTECH Series 3000 Digital Pressure Gauge Range 0 to 750 PA By Vasai Highway Vasai East – Vasai Maharashtra

Industry Leaders Supplier GEMTECH Series 3000 Digital Pressure Gauge Range 0 to 750 PA By Vasai Highway Vasai East – Vasai Maharashtra

Thank You For Choosing Our Digital Differential Pressure Gauge.Please Read This Manual Before Using If You Have Any Doubt About The Use,Please Feel Free To Contact Our Company,We Are Quite Willing To Serve You

MATTERS NEEDING ATTENTION：

Please Do Not Modify The Internal Wiring And Lines Of The Digital Differential Pressure Gauge By Your Self Please Choose a Safe Area To Install The Digital Differential Pressure Gauge To Prevent High Temperature And Avoid Splashing Of Moisture And Water Droplets When The Battery Voltage Is Low,Please Replace The Battery In Time

RELEVANT MATTERS BEFORE USE DELIVERY INSPECTION

Each Differential Pressure Transmitter is Subject to Strict Quality Control Before Delivery. Product Packaging Adopts Enhanced Anti-Collision Treatment. After Opening The Box,Please Check Whether The Product Caused Damage During The Transportation
APPLICATIONS AND FEATURES
Using High-Precision Sensors And Digital Technology,Can Detect Positive Pressure,Negative Pressure Or Differential Pressure Can Be Widely Used To Measure The Pressure Of Fans And Blowers Filter Resistance Wind Speed Furnace Ventilation Pressure Drop Caused By Orifice Plates,Liquid Level In Foaming Systems And Pressure In Booster Or Hydraulic Systems Can Be Used On Medical Equipment To Monitor Blood And Respiratory Pressure Suitable For Embedded Installation,Flat Installation And Other Installation Methods
Various Measuring Ranges
No Moving Parts,Anti-Vibration
Accuracy Up To ±1%FS, ±3%FS(0-60Pa),±2%FS(0-125Pa)
Button Function:Zero Calibration,Unit Switching
STORAGE AND INSTALLATION
The Product Should Be Kept In a Dry And Grime Free Place
Storage Temperature:-10℃~+40℃
Storage Humidity:0%~90%.
Vibration:20Hz: 9.8 m/s2 (1G) max;20Hz~50Hz:5.88 m/s2 (0. 6G) Max
Avoid Storing in Corrosive Gas And Liquid Environment.
It is Best to Store It Properly Packaged On a Shelf Or Table
If it is used in an open package and it exceeds 3 months, the ambient temperature of the storage environment should not be higher than 30 ℃.This is because when the electrolytic capacitor is stored without electricity,its characteristics are easily deteriorated when the ambient temperature is too high.Do not leave it for more than a year without electricity
Ambient Temperature:-10~+50℃ (14~104℉)
Ambient Relative Humidity:<90%,no frost
Installation Height:<1000m
On a circle with a diameter of 105mm,drill 3 holes with an average angle of 120 degrees.The hole diameter is between 3-3.2 (as shown in the picture above). Mounted on The Surface With Accessory Screws M3X8.Choose one Pair of Pressure ports to connect to the Air Tube,Pay attention to the Difference Between High and Low Pressure Ports,And Make Sure to Seal the other pair of pressure ports with
On the plate that needs to be embedded,punch a hole, the diameter of the hole is between 114 and 3-114.8mm.Embed the product and install the accessory feet on the back.Then fix it on the plate with M3.5X50 self-tapping screws.Choose one of the pair of pressure ports to connect to the Airway Note the Difference Between High/Low Pressure Ports And Make Sure To Seal The Other
PRODUCT PARAMETERS Medium:Air And Non-Flammable,Non-Corrosive Gas
Medium Temperature: 0-60°C
Shell:ABS Engineering Plastic
Working Environment:-20°C～+85°C
Differential Pressure Range:a variety of Ranges.Overload 3xFS,Breaking pressure 10×FS
Long-Term Stability:±0.1% FS/Year
Temperature Drift Coefficient: <0.03% FS/°C
Power Supply:4 -20mA 

Featured

Industry Leaders Supplier GEMTECH Differential Pressure Gauge Wholesale India From Jalbera – Ambala (Haryana)

Industry Leaders Supplier GEMTECH Differential Pressure Gauge Wholesale India From Jalbera – Ambala (Haryana)
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

Industry Leaders Supplier GEMTECH Differential Pressure Gauge – Vasai Maharashtra

Industry Leaders Supplier GEMTECH Differential Pressure Gauge – Vasai Maharashtra
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

Industry_Leaders Supplier GEMTECH Differential Pressure Gauge Range 5-0-5 MM WC- Nirala Nagar,Lucknow (UP)

Industry_Leaders Supplier GEMTECH Differential Pressure Gauge Range 5-0-5 MM WC- Nirala Nagar,Lucknow (UP)
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge Supplier By West Bengal Kushmandi India- Howrah (West Bengal)

GEMTECH Differential Pressure Gauge Supplier By West Bengal Kushmandi India- Howrah (West Bengal)
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge Supplier By West Bengal Kushmandi India | Howrah (West Bengal)

GEMTECH Differential Pressure Gauge Supplier By West Bengal Kushmandi India | Howrah (West Bengal)
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH_Differential Pressure Gauge Wholesale India From Morbi City Gujarat India- Rafaleshwar Industrial Area Rajkot (Gujarat)

GEMTECH_Differential Pressure Gauge Wholesale India From Morbi City Gujarat India- Rafaleshwar Industrial Area Rajkot (Gujarat)
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge Wholesale India Supplier By Bangalore Jayanagar – Mysuru India (Karnataka)

GEMTECH Differential Pressure Gauge Wholesale India Supplier By Bangalore Jayanagar – Mysuru India (Karnataka)

Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,
  • Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH Differential Pressure Gauge Supplier By Mysuru Karnataka

GEMTECH Differential Pressure Gauge Supplier By Mysuru Karnataka
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

GEMTECH_Differential Pressure Gauge Wholesale India From Sasne – Ghansoli I Navi Mumbai (Maharashtra) -400701

GEMTECH_Differential Pressure Gauge Wholesale India From Sasne – Ghansoli I Navi Mumbai (Maharashtra) -400701
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.
Featured

Evaporative Cooling Pad From Ghansoli Navi Mumbai Maharashtra- 400701

Evaporative Cooling Pad From Ghansoli Navi Mumbai Maharashtra- 400701

Evaporated Cooling Pad Backed by Rich Industry Experience And Market Understanding, We Are Involved In Offering a Wide Array of Evaporated Cooling Pad To Our Valued Patrons.

Applications:

  • Live stocks
  • Greenhouses
  • Gas Turbine
  • Pre Cooler For Air Cooled Condenser
  • Spray Painting Booth
  • Industrial Applications
  • Commercial Applications
  • Humidification.

Available Size:

  • Dimensions: 600 MM X 600 MM X 50 MM
  • Dimensions: 900 MM X 600 MM X 50 MM
  • Dimensions: 1200 MM X 600 MM X 50 MM
  • Dimensions: 1500MM X 600 MM X 50 MM
  • Dimensions: 1800 MM X 600 MM X 50 MM
  • Dimensions: 600 MM X 600 MM X 100 MM
  • Dimensions: 900 MM X 600 MM X 100 MM
  • Dimensions: 1200 MM X 600 MM X 100 MM
  • Dimensions: 1500MM X 600 MM X 100 MM
  • Dimensions: 1800 MM X 600 MM X 100 MM
  • Dimensions: 600 MM X 600 MM X 200 MM
  • Dimensions: 900 MM X 600 MM X 200 MM
  • Dimensions: 1200 MM X 600 MM X 200 MM
  • Dimensions: 1500MM X 600 MM X 200 MM
  • Dimensions: 1800 MM X 600 MM X 200 MM
  • Dimensions: 600 MM X 600 MM X 300 MM
  • Dimensions: 900 MM X 600 MM X 300 MM
  • Dimensions: 1200 MM X 600 MM X 300 MM
  • Dimensions: 1500 MM X 600 MM X 300 MM
  • Dimensions: 1800 MM X 600 MM X 300 MM

Why Evaporative Cooling Pad ?

  • Available in Standard and Customised Sizes
  • Durable
  • Compatible
  • Economical
  • All-India Network
  • Technical Support
  • No Edge Build Up
  • Good Quality Gluing
  • Quick Deliveries
  • Water Retention
  • Samples Available On Request

Ideal For:

  • Green Houses,
  • Mushroom Farming,
  • Agrihot And Floriculture
  • Poultry Farms,
  • Hatcheries,
  • Breeding Areas,
  • Livestock And Dairy Farms
  • Commercial And Industrial Areas
  • Industrial Coolers
Featured

GEMTECH_Differential Pressure Gauge Wholesale India From Chotu Nagar- Samrat Industrial Area Rajkot Gujarat India

GEMTECH_Differential Pressure Gauge Wholesale India From Chotu Nagar- Samrat Industrial Area Rajkot Gujarat India
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.

GEMTECH Differential Pressure Gauge From Domjur-Lakhanpur Industrial Area Domjur Howrah West Bengal | https://dpengineersindia.in

GEMTECH Differential Pressure Gauge From Domjur-Lakhanpur Industrial Area Domjur Howrah West Bengal | https://dpengineersindia.in
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate,The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime,They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely.The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70(21(±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)
  • FEATURES
  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa
  • PRODUCT APPLICATIONS
  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication
  • MODELS & ORDERING
  • GEMTECH By  Model Number Popularity 
  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0.

GEMTECH Differential Pressure Gauge G2000 FROM Sector- 76 Faridabad-Saroorpur Industrial Area Faridabad | https://dpengineersindia.in

GEMTECH Differential Pressure Gauge G2000 FROM Sector- 76 Faridabad-Saroorpur Industrial Area Faridabad | https://dpengineersindia.in
Series G2000 GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of Filter, Wind Speed, Furnace Pressure, Differential Pressure Of Pore Plate, The Pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materials.
SPECIFICATION

  • Ambient Temperature –   -21 ~140 -6 ~60
  • Rated Pressure -20 inHg~30 inHg (-68~103KPa)
  • Overpressure – Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa)
  • Process Connections – 1/8″ female NPT duplicate high and low pressure taps – one pair side and one pair back
  • Housing – Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
  • Accuracy – ±2% of full span at 70 (21 (±3% on -0, and ±4% on -00)
  • Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

  • OEM/ODM
  • There Is No Need To Fill Liquid To Gauge.
  • The Gauge Can Measure Positive Pressure,Negative Pressure And Differential Pressure.
  • It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
  • To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
  • Exact And Stable Fixed Position Of Needle.
  • The Gauge Has Great Antiknock Characteristics.
  • There Are 81 Types Of Ranges.Minimum is 0-60 Pa And Maximum is 0-21-KPa

PRODUCT APPLICATIONS

  • Filter Monitoring
  • Air Velocity With Pitot Tube
  • Blower Vacuum Monitoring
  • Fan Pressure Indication
  • Duct,Room or Building Pressures
  • Clean Room Positive Pressure Indication

MODELS & ORDERING

GEMTECH By  Model Number Popularity 

  • FILTER BY
  • Range – MM Of Water
ModelDescription
G2000-100MMDPG,Range 0-100 MM W.C., Minor Divisions 2.0.
G2000-10MMDPG,Range 0-10 MM W.C.,Minor Divisions .20,Calibrated For Vertical Scale Position.
G2000-150MMDPG,Range 0-150 MM W.C.
G2000-15MMDPG,Range 0-15 MM W.C.
G2000-200MMDPG,Range 0-200 MM W.C.
G2000-250MMDPG,Range 0-250 MM W.C.
G2000-25MMDPG,Range 0-25 MM W.C. Minor Divisions .50.
G2000-300MMDPG,Range 0-300 MM W.C.
G2000-50MMDPG,Range 0-50 MM W.C., Minor Divisions 1.0.
G2000-6MMDPG,Range 0-6 MM W.C., Minor Divisions .20, Calibrated For Vertical Scale Position.
G2000-80MMDPG,Range 0-80 MM W.C., Minor Divisions 2.0